Appendix 8. Protein estimation

Select language:
Permalink
On this page

    Update: February 2024

     

    8.1 Pandy test

    Pandy test is used to detect an increase of protein in the cerebrospinal fluid (CSF).
    The normal range of protein in CSF is 0.20 to 0.45 g/litre.
    The Pandy test is positive when protein is superior to 0.45 g/litre.

    Equipment

    • Disposable gloves
    • Pandy reagent
    • Pasteur pipettes
    • Conical centrifuge glass tube or test tube
    • 1 ml pipettes

    Preparation of 500 ml of Pandy reagent

    Pandy is a saturated phenol solution.

    • Weigh 30 g of phenol and transfer it into a 1000 ml bottle.
    • Add 500 ml of distilled water and shake vigorously.
    • Leave to stand for one 24 hours.
    • Check that some phenol remains undissolved:
      • If so, filter: the solution is ready.
      • If all the phenol has dissolved, add a further 10 g of phenol and wait another 24 hours before filtering.

     

    Pandy reagent is a highly corrosive and toxic solution:

    • Label the bottle and mark it corrosive and poisonous.
    • Wash hands after preparation.

    Technique

    • Place 1 ml of Pandy reagent in a centrifuge tube.
    • Add 3 drops of CSF, drop by drop.
    • After each drop, look for a white cloud in the tube.
    • To facilitate the reading, place a black surface behind the tube.

    Results

    • Presence of a white precipitate: Pandy test positive.
    • Absence of a white precipitate: Pandy test negative.

    8.2 Rivalta test

    The Rivalta test is used to detect an increase of protein in the body fluid (pleural fluid, ascites).
    The test is positive when the proteins are superior to 30 g/litre.

    Equipment

    • Disposable gloves
    • Rivalta reagent
    • Pasteur pipettes
    • Conical centrifuge glass tube or test tube
    • 5 ml pipette

    Preparation of 100 ml of Rivalta reagent

    • Place 50 ml of distilled water in a 100 ml measuring cylinder.
    • With a 5 ml pipette, add 3 ml of glacial acetic acid and make up to the 100 ml mark with the remaining 50 ml of distilled water.
    • Transfer the solution into a bottle.

    Technique

    • Place 2 ml of Rivalta reagent in a centrifuge tube.
    • Add 3 drops of pleural fluid/ascites, drop by drop.
    • After each drop, look for a white cloud in the tube.
    • To facilitate the reading, place a dark surface behind the tube.

    Results

    • Presence of a white precipitate: Rivalta test positive.
    • Absence of a white precipitate: Rivalta test negative.