CHLORINE-RELEASING COMPOUNDS (NaDCC, HTH, bleach, chlorinated lime)

Select language:
Permalink
On this page

     

     
     
     

     

    Therapeutic action

    • Disinfectants

    Indications

    • Disinfection of medical devices, instruments, linen, floors and surfaces

    Forms and strengths

    The potency of chlorine disinfectants is expressed in terms of active chlorine in either:

    • percentage (%)
    • g/litre or mg/litre
    • parts per million (ppm)
    • chlorometric degree (1°chl. = approximately 0.3% active chorine)

    1% = 10 g/litre = 10 000 ppm

    1 mg/litre = 1 ppm = 0.0001%

     

    The most widely used chlorine disinfectants are:

    • Sodium dichloroisocyanurate (NaDCC), 1,67 g tab........................................1 g active chlorine/tab
    • Calcium hypochlorite (HTH), granules...........................................................65-70% active chlorine
    • Sodium hypochlorite solutions (liquid bleach):
      • concentrated bleach  ...................................................................36°chl. = 9.6% active chlorine
      • bleach ...............................................................9°chl or 12°chl. = 2.6% or 3.6% active chlorine
    • Chlorinated lime, powder .............................................................................25-35% active chlorine

    Preparation and use

    • The concentration required depends on the amount of organic material present (how clean/unclean the surface is).
    • The active chlorine content must always be checked on the product packaging in order to adjust the dilution if necessary.
    • Prepare solutions with cold water in non-metallic containers.
    • A deposit in HTH solutions and chlorinated lime solutions is normal (use only the supernatant).

     

     

    Clean medical devices, equipment, surfaces and linen
    (after cleaning)

    Surfaces, beds, utensils in case of cholera
    (after cleaning)

    Surfaces, equipment contaminated with blood and other body fluid spills
    (before cleaning)

    Corpses, excreta, boots in case of cholera

    Concentration required, expressed in active chlorine

    0.1%
    = 1000 ppm

    0.2%
    = 2000 ppm

    0.5%
    = 5000 ppm

    2%
    = 20 000 ppm

    NaDCC
    (1 g active chlorine/tablet


    1 tab/litre water


    2 tab/litre water


    5 tab/litre water


    20 tab/litre water

    Calcium hypochlorite
    (70% active chlorine)

    15 g/10 litres
    = 1 level tablespoon
    for 10 litres water

    30 g/10 litres
    = 2 level tablespoons
    for 10 litres water

    7.5 g/litre
    = ½ tablespoon
    for 1 litre water

    300 g/10 litres
    = 20 level tablespoons
    for 10 litres water

    Bleach
    (2.6% active chlorine)

    For 5 litres:

    200 ml
    + 4800 ml water

    For 5 litres:

    400 ml
    + 4600 ml water

    For 1 litre:

    200 ml
    + 800 ml water

    For 5 litres:

    4000 ml
    + 1000 ml water

     

    For more information, see Antiseptics and disinfectants, Part two.

    Precautions

    • Handle concentrated products with caution (avoid jolts and exposure to high temperatures or flames).
    • Do not bring dry products, particularly HTH and chlorinated lime, in contact with organic materials (e.g. corpses): risk of explosion.
    • Avoid inhaling vapours and dust when opening or handling the containers.

    Remarks

    • Sodium dichloroisocyanurate (NaDCC) is less corrosive than the other products.
    • Bleach or concentrated bleach, or if not available HTH, may be used to prepare an antiseptic solution at 0.5% active chlorine (as substitute to Dakin's solution), provided sodium bicarbonate (one tablespoon per litre) is added to the final solution to neutralise the alkalinity (e.g. for one litre: 200 ml of bleach 2.6% + 800 ml distilled or filtered water, or if not available, boiled and cooled water + 1 tablespoon of sodium bicarbonate).
    • Chloramine T (powder or tablet, 25% active chlorine) is another chlorine-releasing compound used above all as an antiseptic.
    • Trichloro-isocyanuric acid (TCCA), in powder or granules (90% active chlorine), is very similar to NaDCC, but its use is limited due to its poor solubility.

    Storage

     
    –  
     
    –   In airtight, non-metallic containers, protected from light, heat (and humidity for dry products).
    Chlorinated lime, bleach and concentrated bleach are unstable. HTH is more stable. NaDCC is by far the most stable.